Modern push start systems are no longer limited to luxury vehicles. With the right kit, you can upgrade your car with a smart keyless ignition system and enjoy a more modern driving experience.

In this guide, we'll walk you through how to install a push start button system safely and correctly.

What Is a Push Start System?

A push start system replaces the traditional metal key ignition with a smart button ignition system. Most modern kits also include:

The system allows you to start your vehicle with the press of a button instead of inserting a physical key.

Tools You May Need

Before starting installation, prepare the following tools:

Pro Tip: Professional installation is recommended if you are unfamiliar with automotive wiring.

Step 1: Disconnect the Battery

Safety comes first. Disconnect the negative terminal of your vehicle battery before touching any wiring.

Step 2: Remove Steering Column Panels

Carefully remove the plastic trim around the steering column and ignition area.

Step 3: Locate Ignition Wires

Find the factory ignition harness behind the key cylinder. Typical wires include:

Use a multimeter to confirm wire functions before connecting the system.

Step 4: Connect the Push Start Module

Follow the wiring diagram included with your push start kit. Secure all connections using proper connectors and electrical tape.

Step 5: Install the Push Start Button

Choose a clean mounting location near the dashboard or original ignition area.

Step 6: Test the System

Reconnect the battery and test all functions: ACC mode, ignition ON, engine start, brake detection, and keyless entry.

Final Tips

Conclusion

Installing a push start button system is one of the most satisfying upgrades for modern vehicles. With patience and proper wiring, most installations can be completed within a few hours.

Need help with your installation? Contact our support team or visit our product page for more information.